SPEEDMAX The revolution in bending technology

Schmale Speedmax

The Speedmax - The automation solution in bending technology for large quantities.

Our Speedmax is more than a bending machine. It is one of the fastest available wire and tube forming automation solutions available on the market for CNC bending machines. By combining CNC finger benders with our servo-electric transfer, the Speedmax with its 90 servo axes can reach a speed of up to 4,000 machining steps per minute.

Processing steps / production speed:

The SPEEDMAX is available in three variants (S,M,L). In the current version the SPEEDMAX (S) has 20 processing stations and can produce up to 200 parts per minute. Our engineers developed a new machine concept which combines the advantages of 3D-CNC wire bending and wire bending by slides. Bending, embossing, notching, flattening, joining, punching, swaging of tubes and wire are possible production technologies in the 20 processing stations.

SPEEDMAX "S" working impressions on our youtube channel 

NEW: SPEEDMAX L

The new SPEEDMAX L has actually 20 processing stations and can produce up to 60 parts per minute. The SPEEDMAX L can work with tube and wire up to a diameter of 12mm and a feed length of 50cm. Various bends in all levels and in the current equipment up to four swaging processes are no problem. With a different configuration, the SPEEDMAX L can of course also embossing, notching, flattening and punching.

A short video of our SPEEDMAX L can be found in our Youtube channel. Youtubegrafik


Set-up time:

The set-up time for a product change with 3D bends is e.g. only a few minutes if the wire has the same diameter. If necessary - tools are changed in less than 2 minutes.

SPEEDMAX Variants

Variant Diameter Length
S 1 - 4 mm up to 300 mm
M 4 - 8 mm up to 500 mm
L 8 - 12 mm up to 500 mm

SPEEDMAX special designs are possible on request

Technologies

The following production technologies are possible in the 20 processing stations:

Bending, embossing, notching, flattening, joining, punching, swaging,...
(of tubes and wire)




The Speedmax - The automation solution in bending technology for large quantities


Our Speedmax is more than a bending machine. It is one of the fastest available wire and tube forming automation solutions available on the market for CNC bending machines. By combining CNC finger benders with our servo-electric transfer, the Speedmax can produce up to 200 parts per minute with up to 20 processing steps each. This makes us the manufacturer of probably the fastest CNC wire bending machine in the world. The integration of servo-electric presses such as upsetting presses or stamping presses enables the bending of wire and pipe as well as further forming processes. This makes us proud as a manufacturer of wire bending machines in Germany. Mechanical engineering is a passion for us.

You need help?

Of course we will be glad to assist you
personally. You can reach us on
working days between 8 a.m. and 5 p.m. (GMT +1)

You can also get in touch with your
personal contact person ...

+49 (0) 23 52 / 548 64-0

+49 (0) 23 52 / 548 64-01

send mail